The Antar�s range has been further extended with the arrival of the Antar�s 6.20 OB.This new outboard-driven model has the distinctive feature of an unsinkable hull (certification pending).It has similar lines and planing hull to its sister, the Antar�s 6.50 HB, and promises excellent sea-keeping and stability both underway and at rest.With a walk-around deck, a spacious wheelhouse and a large self-draining cockpit, the Antar�s 6.20 OB provides for a variety of uses from coastal passages to fishing trips.Fitted out in an clever but functional way, its standard equipment is comprehensive, including a glass windscreen, electric wipers, fish-box, her own water supply, steering compass, cockpit seating, fishing-rod holders and opening hatch in the wheelhouse roof.The Antar�s 6.20 OBs C6 category approval, her cabin and her 90HP outboard (maximum 115HP) make her perfect for day trips. Also worth noting is this boats shallow draft: only 40cm (16 ins) with the engine raised.This boat will be previewed at the next Grand Pavois boat show and will be available to buy from autumn 2004.
Boat Designer
BE Býnýteau/P.Sarrazin
Cabin Accommodation
-
Cockpit
The cockpit fittings include the following:
Folding stainless steel bathing ladder, which stows in its
own self-draining locker.
Cockpit hatch allowing access to the cockpit locker,
fuel tank, battery* and fuel filter* (* supplied as part of
the Engine Pack only).
Fold down bench seat in stern, with cushions.
Backrest for seat, with cushion, which doubles as
leaning support for fishing when seat is folded away.
Teak-capped coamings with 2 fishing-rod holders and
handrails. Mooring cleats protected by the teak
gunwale, facilitating fishing with nets.
Aluminium fairleads.
Outboard motor well for motor when raised, and
reinforced transom for engine of maximum 115 HP.
Space on transom for auxiliary motor of maximum 6
HP.
Deck filler for fuel tank.
4 stainless steel handrails.
- 2 by wheelhouse steps.
- 2 on wheelhouse roof.
The cockpit is self-draining and incorporates steps up to
the side-decks.
Dashboard
-
Deadrise at Transom
-
Deck
- MOORING AND ANCHORING -
The stainless steel bow fitting is augmented by the
following:
Lifting ring.
5 x 200mm stainless steel mooring cleats: 2 forward, 2
aft and one in the anchor well which may be used to
secure the bitter end of the anchor cable.
Integral moulded self-draining anchor well with access
hatch.
- GUARDRAILS -
The stainless steel pulpit rail surrounds the deck with an opening to allow easy boarding over the bow.
The stainless steel aft rail doubles as a backrest for the cockpit seating.
Draft Board/Drive Up
-
Dry Weight
3123.95 lb Displacement
Electrical
1 x 12V 110A battery and fuel filter supplied with
Engine Pack only (not with basic hull).
Helm position with integral engine panel.
Electric and manual bilge pumps.
Six function 12V electrical panel including:
- Switch for bilge pump.
- Switch for navigation lights.
- Switch for windscreen wipers.
- 12V socket.
- 2 spare switches for electronic equipment.
Navigation lights:
- All-round light on folding mast.
- Bicolour sidelights.
Lighting:
- One deckhead light each in the cockpit and the
wheelhouse.
Engine
Outboard
Engine Mechanical
The boat is designed to take engines of up to 115HP.
B�n�teau offers two engine packages:
- 70 HP Suzuki 4-stroke outboard: giving a
cruising speed of 18 knots and a maximum speed of
22� knots (approx).
- 90 HP Suzuki 4-stroke outboard: giving a
cruising speed of 22 knots and a maximum speed of
27� knots (approx).
The fuel tank is of moulded plastic, which is translucent and
shock-resistant, with a capacity of 136L. Standard Suzuki 3-
bladed aluminium propeller.
Engine Notes
-
Flybridge
-
Fuel
-
Fuel Capacity
35.93 gal
Galley
-
General Construction
-
Horsepower (total)
Hull
The hull is laid up from GRP. Foam-cored to increase
buoyancy, the hull absorbs efforts and stresses resulting in a
very rigid structure.
The hull comes to the plane early, allowing high speeds
approaching 30 knots with the maximum designed engine
power.